Grading Size Table Tool

What it Does

Creates a table of sizes to grade your patterns, including their name, style/color and position within the grade. You will establish the position of the base and vector patterns within the sizes. All other patterns will use this to calculate the grade values.

How to Use

1. Activate the tool by clicking the Grading Size Table icon
2. Enter the total number of sizes you will have
3. The next process will loop for the number of sizes you chose
4. Your entries must start at the smallest size, size #1
5. Select the Pattern Type - base pattern, vector pattern or intermediate
6. Enter a name for this size
7. Select a style/color for this size
8. Select Continue
9. The complete Grading Size Table will be displayed
10. Make sure your base and vector patterns are placed in the correct positions within the table
11. Click Save if it is correct or Cancel to abort

warning

If there is an existing Grading Size Table, it will be shown when you open the tool. You can choose to replace it, which starts the process over.

🧠Memorization

Grading is not a memorizable process. Do not memorize the draft you are grading; it cannot be recalled in its graded state.