Skip to main content

Load Set for Active Draft

What it Does​

Chooses which measurement set your current draft uses.

A measurement set is a named list of body measurements, for one person or for one size. Once you load a set, the tools can use its measurements. For example, the Select from Measurement Set list in an input box shows the measurements from the loaded set. See Entering Values.

PMP converts the loaded values to the unit of your draft, so the set and the draft can use different units. Inches, centimeters and millimeters all work. The converted values are rounded to two decimal places.

Use this when you start a draft, or when you want to switch to a different person or size. You can load a different set at any time. A memorized draft keeps the measurement names, so it can be redrafted with another set. See Memorized Drafts.

How to Use​

  1. Select Measurements > Load Set for Active Draft from the main menu. If you have no sets yet, the toolbox says "No measurement sets available." Create one first with Add Measurement Set.
  2. Select a set from the Available Sets: list.
  3. PMP shows a message that the set was loaded. The Measurements name at the top of the toolbox now shows the set you chose.
  4. Select Close.
warning

A set with no measurements in it cannot be loaded. PMP shows the alert "Measurement set loading failed." and the toolbox shows None Selected. Add measurements first with Edit Measurement Set.

info

PMP does not remember the loaded set when you start a New Draft or open an existing draft. Load the set again each time.