Add Point on Vector Tool

What it Does

Adds a point a set distance from a start point, in the direction of a second point. A vector is just a direction. Here the direction is the line from your start point toward the second point you select. The new point does not need to land on a drawn line.

Use this when you want a point beyond the end of a line, or in the same direction as an angled edge.

How to Use

1. Activate the tool by clicking the Add Point on Vector icon
2. Select the start point, then select Continue. This point is shown in blue
3. Select a second point to set the direction, then select Continue
4. Enter the Distance from Blue, in the unit shown
5. Select Preview to see the new point. It appears the distance you entered away from the blue point, toward the second point
6. If the point is on the wrong side, select Other Side to place it the same distance in the opposite direction
7. Enter a name in the Name box
8. Select Save to keep the point, or Cancel to leave without adding it

info

You can type a number or a formula for the distance.

🧠Memorization

When you memorize a draft, the new point is remembered along with the distance you entered.