Scale Output Tool

What it Does

Makes a PDF of your pattern at a smaller size. You choose a scale (1/4, 1/3 or 1/2) and a paper size, and PMP creates the PDF.

Use this when you want to test a fit or make a small sample garment without using full-size paper and fabric.

info

This does not change the size of your draft. It only changes the PDF.

How to Use

1. Activate the tool by selecting the Scale Output icon
2. Select a scale: 1/4 Scale, 1/3 Scale or 1/2 Scale. Then select Continue
3. Select a paper size, then select Continue
   • Letter is the American 8.5" x 11" page
   • A4 is the international 210 mm x 297 mm page
   • 11" x 17" is the American tabloid page
   • 13" x 19" is the American Super B page
   • 24" Roll is for large-format printers with paper rolls. The page is 24" wide and as long as the pattern needs
   • 36" Roll is the same, with a 36" wide page
   • Projector puts the whole pattern on one page, whatever its size, for use with a projector
4. PMP creates a PDF named MyPattern_Scale_ followed by the scale, such as MyPattern_Scale_0.25.pdf. If the pattern is larger than the page, it is split across several pages
5. Select Close to leave the tool

info

You need to select a scale and a paper size. If you select Continue without choosing one, a message asks you to choose.